To connect your modem via Fibre to the Node or Fibre to the Basement, follow the steps below:
-
Ensure that your modem is plugged in and turned on.
-
Locate your main telephone socket
-
Connect the telephone/ADSL cable (RJ11) as shown below
Wait for the modem to connect to the nbn, the “internet” indicator on your modem will illuminate when ready.
Your modem should connect automatically, however in some instances you may need to power cycle your modem, or log into your modem and update the settings below:
-
Connection type: PPPoE
-
Username: "email address used on signup"
-
Password: dodointernet
-
VLAN: Not required/NA